Notification for APPSC AEE Syllabus 2019 PDF |Download Assistant Executive Engineering Syllabus for Civil/Mechanical

305

Notification for APPSC AEE Syllabus 2019 PDF |Download Assistant Executive Engineering Syllabus for Civil/Mechanical

APPSC AEE Syllabus 2019 PDF: 

APPSC AEE Syllabus 2019 PDF Released at official website www.psc.ap.gov.in. This is the Latest information for APPSC Recruitment 2019 Notification For 309 Posts. Here Andhra Pradesh Public Service Commission has published the Assistant ExecutiveEngineering notification for 309 Vacancies. This is a good opportunity for trying to get a job in Government Side. All the candidates can read the complete article for more information.

The organization has revised the new exam schedule for Assistant Executive engineers Recruitment. The organization can hire the candidates those who select the merit list in the computer-based test. The screening test will be held on 17-02-2019 in different examination Centers. And the Main examination will conduct on 1st and 2nd April 2019.

Notification for APPSC AEE Syllabus 2019 PDF |Download Assistant Executive Engineering Syllabus for Civil/Mechanical

APPSC AEE Syllabus 2019 PDF Details:

Name Of The Organization: Andhra Pradesh Public Service Commission(APPSC).
Post Name: Assistant Executive Engineer Posts 
No. of Posts: 309 Posts
Notification Released Date: 23- Nov-2018.
Application Starting Date: 03 Dec 2018
Application Closing Date: Assistant Executive Engineer Posts 
Category   APPSC AEE Syllabus 2019 PDF
Selection Process: Computer Based Test(Screening Test, Main Examination
Official Website www.psc.ap.gov.in

ANNEXURE – II

NOTIFICATION NO.09/2018 SCHEME AND SYLLABUS FOR RECRUITMENT TO THE POSTS OF ASSISTANT EXECUTIVE ENGINEERS IN VARIOUS ENGINEERING SERVICE

SCHEME FOR SCREENING TEST WRITTEN EXAMINATION (OBJECTIVE TYPE) BACHELOR’S DEGREE STANDARD

 

.Notification for APPSC AEE Syllabus 2019 PDF |Download Assistant Executive Engineering Syllabus for Civil/Mechanical

 

NB: The candidate has to appear for Papers of his / her subject of study at Engg. Degree. i.e B.E / B. Tech (concerned Subject)
1. NEGATIVE MARKS: As per G.O. Ms. No.235 Finance (HR-I, Plug & Policy) Dept., Dt.06/12/2016, for each wrong answer will be penalized with 1/3rd of the marks prescribed for the question.

SYLLABUS FOR SCREENING TEST TO THE POST OF ASSISTANT EXECUTIVE ENGINEERS IN CIVIL, MECHANICAL AND ELECTRICAL ENGINEERING

PART – A

50 QUESTIONS 50 MARKS

GENERAL STUDIES AND MENTAL ABILITY

 

1. Events of national and international importance.

2. Current affairs- international, national and regional.

3. General Science and its applications to the day to day life Contemporary developments in Science & Technology and Information Technology

4. A social- economic and political history of modern India with emphasis on Andhra Pradesh.

5. Indian polity and governance: constitutional issues, public policy, reforms and e-governance initiatives with specific reference to Andhra Pradesh.

6. Economic development in India since independence with emphasis on Andhra Pradesh. 7. The physical geography of Indian sub-continent and Andhra Pradesh.

8. Disaster management: vulnerability profile, prevention and mitigation strategies, Application of Remote Sensing and GIS in the assessment of Disaster.

9. Sustainable Development and Environmental Protection.

10.Logical reasoning, analytical ability, and data interpretation.

11. Data Analysis: a) Tabulation of data b) Visual representation of data c) Basic data analysis (Summary Statistics such as mean, median, mode, variance and coefficient of variation) and Interpretation

12. Bifurcation of Andhra Pradesh and its Administrative, Economic, Social, Cultural, Political, and Legal Implications/problems.

 

SYLLABUS FOR SCREENING TEST TO THE POST OF ASSISTANT EXECUTIVE ENGINEERS IN CIVIL AND MECHANICAL ENGINEERING

PART – B

100 QUESTIONS 100 MARKS

1. Strength of Material: Forces, moments, Equilibrium; Applying the Equation of Equilibrium, Planar Trusses; Friction; Simple Stresses & Strains: Elasticity and plasticity, Types of stresses & strains, Generalized Hooke’s law – Stress-strain diagram for mild steel – Working stress –Factor of safety – Lateral strain, Poisson’s ratio & volumetric strain – Elastic module & the relationship between them – Bars of varying section – composite bars –Temperature stresses. Strain energy – Resilience – Gradual, sudden, impact and shock loadings. Sheer Force (S.F) and Bending Moment (B.M): Definition of beam –Types of beams – Concept of shear force and bending moment – S.F and B.M for cantilever, simply supported and overhanging beams subjected to point loads, U.D.L., uniformly varying loads and combination of these loads – Point of contra flexure –Relation between S.F., B.M, and rate of loading at a section of a beam. Flexural Stresses: Theory of simple bending – Assumptions – bending equation: Neutral axis – bending stresses – section modulus of different sections – Design of simple beam sections. Shear Stresses: Derivation of formula –Shear stress distribution across various beam sections Principal Stresses and Strains: Stresses on an inclined section of a bar under axial loading – Compound stresses – Normal and tangential stresses on an inclined plane for biaxial stresses – Two perpendicular normal stresses accompanied by a state of simple shear –Mohr’s circle of stresses –Principal stresses and strains – Analytical and graphical solutions. Different theories of Failure: Various theories of failure. Columns and struts – Euler’s column theory – types of end conditions; the critical load on the column – derivations – Rankin’s formula for columns. Lifting machines, definitions, Law of a machine, study of important lifting machines; virtual work principle. Torsion of Circular Shafts: Theory of pure torsion – Torsion Equations: Assumptions made in the theory of pure torsion – Torsional moment of resistance – Polar section modulus – Power transmitted by shafts – Combined bending and torsion and end thrust. Springs-Helical and leaf springs. Thin & Thick Cylinders and Spherical shells: Thin seamless shells – a formula for longitudinal and circumferential stresses and max shear stresses – hoop, longitudinal and volumetric strains – changes in diameter, and volume of thin shells.

2. Fluid Mechanic and Machinery
Fluid statics: Dimensions and units: physical properties of fluids-specific gravity, viscosity, and surface tension -vapor pressure and their influence on fluid motion-atmospheric, Pascal’s law, gauge, and vacuum pressures – Measurement of pressure-Piezometer, U-tube and differential manometers..Hydrostatics, Fluid forces on planes and curved surfaces, submerged and floating bodies, Buoyancy and stability. Fluid kinematics: description of flow pattern and types of fluid flows – Velocity and acceleration: convective, temporal, tangential and normal accelerations, control volume-basic principles of fluid flow, continuity equation for 3-D, 2-D, 1D flow. Rotational and irrotational motion, Velocity potential, stream function, flow net. Fluid dynamics: Surface and body forces – Euler’s and Bernoulli’s equations for flow along a streamline and its applications, momentum equation, and its applications. Flow measurement devices – Gross measurement: Venturimeter, Orificemeter, Turbine flow meters, Rotameters; Pressure measurement: Pitot tubes, hot wire/film anemometer, their measurement principles and sources of errors; calibration.
Closed conduit flow: Reynolds experiment – Major and Minor losses in pipes-pipes in series and pipes in parallel-total energy line-hydraulic gradient line, water hammer. Boundary-Layer Concepts: Definition, thicknesses, characteristics along the thin plate, laminar and turbulent boundary layers boundary layer in transition, separation of the boundary layer, submerged objects – Drag and lift.
Basics of turbomachinery: Hydrodynamic force of jets on stationary and moving flat, inclined, and curved vanes, velocity diagrams, work done and efficiency, Hydraulic Turbines: Classification of turbines, Heads and efficiencies, impulse and reaction turbines, Pelton wheel, Francis turbine and Kaplan turbine – working proportions, work done, efficiencies , hydraulic design – Draft tube theory-functions and efficiency. Performance of hydraulic turbines: Geometric similarity, Unit, and specific quantities, characteristic curves, governing of turbines, selection of the type of turbine, cavitation. Centrifugal pumps: Classification, working, work done – barometric head-loss and efficiencies, specific speed – Performance characteristic curves, NPSH. Selection of pumps and economic evaluation of pumping.
Hydraulic Directional Control – Check Valves, Shuttle Valves, two- three- and four-Way Directional Control Valves, Directional Control Valve Actuation. Hydraulic Pressure Control – Pressure Relief Valves, Unloading Valves, Pressure Reducing Valves, Sequence Valves, Counterbalance Valves, Pressure Compensated Pumps. Hydro Projects And Plant: Classification – Typical layouts – plant auxiliaries – plant operation, pumped storage plants. Hydro Electric Power Plant: Water power – Hydrological cycle/flow measurement – drainage area characteristics – Hydrographs – Storage and Pondage – Classification of dams and spillways.

SYLLABUS FOR SCREENING TEST TO THE POST OF ASSISTANT EXECUTIVE ENGINEERS IN ELECTRICAL ENGINEERING BRANCH

PART – B

100 QUESTIONS 100 MARKS

1. Electric Circuits: Active and passive network elements – dependent and independent sources – response of passive elements to arbitrary excitations – energy stored in inductance and capacitance – Kirchoff’s loss – formation of mesh and Nodel Integro differential equations – their solutions by classical and Laplace transformation methods – Transient and steady state response of RL, RC elements to impulse, step, ramp and sinusoidal inputs – single phase AC circuits – methods of solutions – poly phase circuits – analysis of balanced and unbalanced circuits – measurements of three phase power.

2. Electrical Measurements and Instruments: Absolute and secondary instrument types – Principle of operation of different type of instrument – extension of instrument ranges – measurement of voltage, current, power and energy – localization of cable faults – Murray loop and Varley loop tests – Cathode ray Oscilloscope.

3. Illumination: Solid angle, luminous flux, luminous intensity – Illumination and candle power – laws of Illumination – flood lighting, street lighting – electric lamps.

4. DC Generators and Motors: Types of DC generators – EMF equation – constructional details – characteristics of shunt, series and compound generators – Armature reaction – types of DC motors – Torque developed in a DC motor – speed controls of DC motors and starters.

5. Transformers: Constructional details – Principle of operati9on – vector diagrams on no load and load – regulation and efficiency – equivalent circuits and tests for the determination of parameters of equivalent circuits – types of three phase transformers and their applications – Scott connection of transformers.

6. 3-Phase Induction Motors: Principle of operation – Cage and Slip ring motors – torque slip characteristics – methods of speed control.

7. 3-Phase Alternators: Principle of operation and constructional details – types of Alternators – synchronous impedance – voltage regulation – short circuit ratio and its importance – Phasor diagrams of round rotor and salient pole machines – synchronization – behaviour of an alternator connected to infinite bus – effect of varying excitation current and mechanical torque – power angle curves – control of active and reactive powers.

8. 3-Phase Synchronous Motors: Principle of operation – torque developed and methods of starting – V and Inverted V curves – effects of variations of excitation – synchronous condensers.

9. Single phase induction Motors: Types of single phase motors – Types of Single phase induction motors – characteristics and methods of starting – shaded pole induction motor.

10. Transmission & Distribution: Line constants – Inductance and Capacitance calculations – Representation of over head Lines – Short, Medium and Long lines – ABCD constants – Mechanical Design – Sag, Tension Calculations, Tuned Power Lines.

11. Over Head Line Insulators: Types of Insulators – Potential distributions over a string of suspension insulators – string efficiency – Methods of improving string efficiency.
12. Underground Cables: Insulation of cables – Grading of cables – Capacitance Measurement in cables – Testing of Cables – Power frequency withstand tests.
13. Fault Calculations: Balanced Fault calculations on systems – Symmetrical components – Types of faults – Analysis of unbalanced faults.
14. Generating Stations: Location and types, types of hydroelectric power stations, layout of a hydro-power plant, types of turbines used – Pumped storage installations – Layout of thermal electric power stations, types of turbines used, condensers, cooling towers, boiler feed pump; energy flow diagram of steam power plant. Nuclear power generation; Nuclear fission – types
34

of nuclear power reactors – Principle of a fast breeder reactor.

15. Protection: Characteristic of Relays – Over current, directional and distance protection of lines. Protection of Alternators against stator faults, rotor faults, loss of excitation, unbalanced loading, overloading, failure of prime-mover. Over speeding and over voltage. Protection of transformers against winding faults, overloads and external short circuits.

16. Circuit Breakers: Air-blast, oil, minimum oil, vacuum – Sulphur hexafluoride and d.c. circuit breakers – Relative merits and demerits.

17. Economic Aspects: Generation costs and their classification, load curve, load utilization and plant capacity factors. Load sharing between base load and peak-load stations. Load forecasting. Economical distribution of load between unit within a plant and between plants. Modeling of fuel costs for thermal generation. Optimal operation of an all thermal generating system and of a hydro-thermal system. Consideration of transmission losses.

18. Utilization of Electrical Energy: Industrial drives – Motors for various drives –Estimating and Rating – Testing of D.C. and A.C. motors – Neutral Earthing.

NB: 1. The candidate has to appear for Papers of his / her subject of study at Engg. Degree. i.e. B.E / B. Tech (concerned Subject)

2. In respect of Paper-3, (Post Code No. 6 & 7) the Examination will be conducted in different session.

3. NEGATIVE MARKS: As per G.O. Ms. No.235 Finance (HR-I, Plg & Policy) Dept., Dt.06/12/2016, for each wrong answer will be penalized with 1/3rd of the marks prescribed for the question.

Notification for APPSC AEE Syllabus 2019 PDF |Download Assistant Executive Engineering Syllabus for Civil/Mechanical

PAPER – I

GENERAL STUDIES & MENTAL ABILITY

 

1. Events of national and international importance.

2. Current affairs – international, national and regional.

3. General Science and it applications to the day to day life Contemporary developments in Science & Technology and information Technology

4. Social- economic and political history of modern India with emphases on Indian national movement.

5. Indian polity and governance: constitutional issues, public policy, reforms and e governance initiatives.

6. Economic development in India since independence.

7. Physical geography of India sub-continent.

8. Disaster management: vulnerability profile, prevention and mitigation strategies, Application of Remote Sensing and GIS in the assessment of Disaster.

9. Sustainable Development and Environmental Protection

10. Logical reasoning, analytical ability and data interpretation.

11. Data Analysis: a) Tabulation of data b) Visual representation of data c) Basic data analysis (Summary Statistics such as mean and variance coefficient of variation etc.,) and Interpretation

12. Bifurcation of Andhra Pradesh and its Administrative, Economic, Social, Cultural, Political, and legal implications/problems.

Download APPSC AEE Syllabus 2019 PDFDownload Now

 

Related Posts:

 

Please follow and like us:
error

LEAVE A REPLY

Please enter your comment!
Please enter your name here